Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony 3-295-946-12(1), HT-SF1300 Tuner, 67GB, Use a, does not appear, RDS does not work, The FM reception is poor, temporarily out of order, • Select a stronger FM station

1 72

Download 72 pages, 1.06 Mb

No sound is output from the receiver and TV speaker while using the System Audio Control function.

•Make sure the TV is compatible with the System Audio Control function.

•If the TV does not have System Audio Control function, set the “AUDIO FOR HDMI” settings in VIDEO menu to

–“TV+AMP” if you want to listen to the sound from the TV speaker and receiver.–“AMP” if you want to listen to the sound from the receiver.•If you cannot listen to the sound of a component connected to the receiver

–Select the appropriate input when you want to watch a program on a component connected via HDMI connection to the receiver.

–Change the TV channel when you want to watch a TV broadcast.

–Select the component or input you want to watch when you watch a program on the component connected to the TV.

Refer to the operating instructions of the TV on this operation.

Tuner

The FM reception is poor.

•Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below. If you connect the receiver to an outdoor antenna, ground it against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe.

Outdoor FM antenna

Receiver

AM

Ground wire (not supplied)

ANTENNA

To ground

Radio stations cannot be tuned in.

•Check that the antennas are connected securely. Adjust the antennas and connect an external antenna, if necessary.

•The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning (page 48).

•Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning).

•No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 48).

RDS does not work.• Make sure that you are tuned to an FM RDS station.

	• Select a stronger FM station.
			Additional
	whether they actually provide the service
	The RDS information that you want
	does not appear.
	• Contact the radio station and find out
	in question. If so, the service may be		Information
	temporarily out of order.

continued

67GB

Contents

Page WARNING For customers in Europe Notice for the customer in the countries applying EU Directives About This Manual The HT-SF1300consists of: • Receiver • Speaker systema) – Front speaker Table of Contents Description and location of parts Front panel About the indicators on the display Rear panel RM-AAU023 FDVD/BD Press to display the menu of DVD/BD MENU AUTO CAL Press to activate the Auto Calibration function AUTO CAL O TV orange printing at the same P RETURN EXIT O – exit the menu while the 1: Installing the speakers HT-SF1300only Example of HT-SS1300front speaker HT-SS1300only 3 Hang the speakers on the screws Example of installing the speakers on the wall 13GB 2: Connecting the speakers ASpeaker cord (supplied) Note on speaker cords To connect the speakers correctly 3:Connecting the audio/ video components Component to be connected AAudio cord (not supplied) Note HDMI feature AHDMI cable (not supplied) Notes on HDMI connections AOptical digital cord (not supplied) BAudio cord (not supplied) CCoaxial digital cord (not supplied) If you connect a DVD player 4: Connecting the antennas 5:Preparing the receiver and the remote 6:Calibrating the appropriate settings automatically Before you perform Auto Calibration Example: HT-SS1300 1 Connect the supplied optimizer microphone to the AUTO CAL MIC jack 2 Set up the optimizer microphone To cancel Auto Calibration When error codes appear To rectify the error When you select “WARN CHK” When you select “PHASE” After you have finished 7:Adjusting the speaker levels and balance To turn off the test tone Selecting a component To activate the muting function To avoid damaging your speakers Listening/Watching a component Adjust to a suitable volume Blu-ray disc player Switch the input of the TV so that an image of the Watching a DVD/Blu-raydisc Refer to the operating instructions supplied with the TV and DVD player or •Check the following if you cannot listen to multi channel sound Be sure the digital audio output of the DVD player or You can select the sound field to suit the movie/music. Refer to Navigating through menus To return to the previous display To exit the menu Overview of the menus Menu Parameters Settings For details, see “Enjoying 35GB Initial setting 36GB Adjusting the level LEVEL menu parameters Adjusting the tone TONE menu parameters Settings for the surround sound SUR menu parameters Settings for the tuner TUNER menu parameters Settings for the audio AUDIO menu parameters Settings for the video VIDEO menu parameters Settings for the system SYSTEM menu parameters xSW DIST. (Subwoofer distance) Lets you set the distance from your listening position to the subwoofer xSUR POS. (Surround speaker position) •BEHD/HI •BEHD/LO Enjoying Dolby Digital and DTS Surround sound Types of A.F.D. mode Selecting a preprogrammed sound field 44GB Types of sound field available To turn off the surround effect for movie/music Resetting sound fields to the initial settings Listening to FM/AM radio In case of poor FM stereo reception If you cannot tune in a station Presetting radio stations Using the controls on the receiver Using the Radio Data System (RDS) Description of program types Program type Description indication 51GB Using the Control for HDMI function for “BRAVIA” Sync The Control for HDMI function does not work in the following cases: To enjoy TV multi channel surround sound broadcasting BOptical digital cord (not supplied)a) CAudio cord (not supplied)a) Preparing Control for HDMI function Watching a DVD Watching a DVD by simple operation Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) You can use the System Audio Control function as follows •You can adjust the receiver’s volume when you adjust the TV volume 56GB Turning off the receiver with the TV Switching between digital and analog audio Audio input modes Enjoying the DIGITAL MEDIA PORT AVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Listening/watching a connected component through DMPORT connection Using the Sleep Timer Changing button assignments Categories and the corresponding buttons To clear all remote button assignments Glossary Precautions On safety On power sources On heat buildup On placement On operation If you encounter color irregularity on a nearby TV screen If color irregularity is observed Troubleshooting Audio Video HDMI Tuner Remote control Error messages If you are unable to remedy the problem using the troubleshooting guide If the problem persist Reference sections for clearing the receiver’s memory Specifications Speaker section HT-SF1300only •Front speaker (SS-MSP23F) •Surround speaker (SS-SRP23F) •Center speaker (SS-CNP23) Supplied speakers Front speakers (2) Center speaker (1) Surround speakers (2) Subwoofer (1) Index