4:Connecting the AC power cord
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
To a wall outlet
Performing initial setup operations
Before using the receiver for the first time, initialize the receiver by performing the following procedure.
This procedure can also be used to return settings you have made to their factory defaults. Use the buttons on the receiver for the operation.
1 Press ?/1 to turn off the receiver.
2 Hold down ?/1 for 5 seconds.
“INITIAL” appears in the display. The following are reset to their factory settings.
•All settings in the SET UP, LEVEL and TONE menus.
•The sound field memorized for each input and preset station.
•All sound field parameters.
•All preset stations.
•MASTER VOLUME is set to “VOL MIN”.
14GB