3) Measured under the following conditions:
Area code | Power requirements |
CN | 220 V AC, 50 Hz |
|
|
Inputs (Analog) |
|
|
|
TV/SAT, DVD, VIDEO | Sensitivity: 500 mV |
| Impedance: 50 kiloohms |
|
|
Inputs (Digital) |
|
|
|
DVD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
|
|
DVD, TV/SAT (Optical) | Sensitivity: – |
| Impedance: – |
|
|
Outputs (Analog) |
|
|
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 kiloohms |
| |
Reproduction frequency range: | |
| 28 – 20,000 Hz |
Tone |
|
|
|
Gain levels | ±6 dB, 1 dB step |
|
|
FM tuner section |
|
Tuning range | 87.5 - 108.0 MHz |
Antenna | FM wire antenna |
Antenna terminals | 75 ohms, unbalanced |
Intermediate Frequency | 10.7 MHz |
AM tuner section
Tuning range
Models of area code CEL, CEK, AU, CN
With | 531 - 1,602 kHz |
Antenna | Loop antenna |
Intermediate Frequency | 450 kHz |
Video section |
|
Inputs/Outputs |
|
Video: | 1 |
General
Power requirements
Area code | Power requirements |
CEL, CEK | 230 V AC, 50/60 Hz |
|
|
AU | 240 V AC, 50 Hz |
|
|
CN | 220 – 230 V AC, 50/60 Hz |
|
|
Power consumption |
|
|
|
Area code | Power consumption |
|
|
CEL, CEK, AU, CN | 170 W |
| |
Power consumption (during standby mode) | |
| 0.3 W |
Dimensions (w/h/d) (Approx.) | |
430 × 352 × 64 mm | |
430 × 352 × 66 mm | |
430 × 352 × 64 mm | |
| including projecting parts |
| and controls |
Mass (Approx.) | 5.5 kg |
Speaker section
Front speakers
•
•
Speaker system | Full range, magnetically |
| shielded |
Speaker units |
|
40 × 70 mm cone type | |
55 × 110 mm cone type | |
Enclosure type | Bass reflex |
Rated Impedance | 6 ohms |
Dimension (w/h/d) (Approx.) | |
246 × 1053 × 246 mm | |
280 × 82 × 106 mm | |
76 × 162 × 106 mm | |
Mass (Approx.) |
|
4.0 kg | |
0.8 kg | |
1.0 kg |
Information Additional
continued
39GB