Advanced settings

Using the SET UP menu to adjust the receiver

You can adjust various receiver settings using the SET UP menu.

1 Press MAIN MENU repeatedly to select “SET UP”.

2 Press or repeatedly to select the parameter you want to adjust.

For details, see “SET UP menu parameters” below.

3 Press or repeatedly to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 to adjust the other items.

SET UP menu parameters

The initial setting is underlined.

xDVD-XXXX

(Audio input mode for DVD input)

Lets you select the audio input mode for DVD input.

•AUTO

Gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected.

•OPT

Specifies the digital audio signals input to the DIGITAL DVD OPT IN jack.

•COAX

Specifies the digital audio signals input to the DIGITAL DVD COAX IN jack.

•ANLG

Specifies the analog audio signals input to the DVD AUDIO IN (L/R) jacks.

xTV-XXXX

(Audio input mode for TV/SAT input)

Lets you select the audio input mode for TV/SAT input.

•AUTO

Gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected.

•OPT

Specifies the digital audio signals input to the DIGITAL TV/SAT OPT IN jack.

•ANLG

Specifies the the analog audio signals input to the TV/SAT AUDIO IN (L/R) jacks.

xDUAL XXX

(Digital broadcast language selection)

Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.

•M/S (Main/Sub)

Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously.

•M (Main)

Sound of the main language will be output.

•S (Sub)

Sound of the sub language will be output.

•M+S (Main + Sub)

Mixed sound of both the main and sub languages will be output.

xDEC. XXXX

(Digital audio input decoding priority)

Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks.

The initial setting is “DEC. AUTO” for TV/SAT and “DEC. PCM” for DVD.

•AUTO

Automatically switches the input mode between DTS, Dolby Digital, or PCM.

•PCM

PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. However, this receiver cannot decode DTS-CD when set to “DEC. PCM”.

Note

When set to “DEC. AUTO” and the sound from the digital audio jacks (for CD, etc.) is interrupted when playback starts, set to “DEC. PCM”.

Settings and Adjustments Advanced

29GB