Presetting radio stations
You can preset up to 30 FM or AM stations. Then you can easily tune in the stations you often listen to.
Presetting radio stations
1 Press TUNER repeatedly to select the FM or AM band.
The last received station is tuned in.
2 Tune in the station that you want to preset using Automatic Tuning (page 18) or Direct Tuning (page 19).
3 Press MEMORY.
“MEMORY” appears in the display for a few seconds. Do steps 4 to 5 before the display goes out.
4 Press PRESET/CH/D.SKIP + or PRESET/CH/D.SKIP – repeatedly to select a preset station number.
Each time you press the button, you can select the preset station number as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
If “MEMORY” goes out before you select the preset station number, start again from step 3.
Tips
•You can also use PRESET TUNING + or PRESET TUNING – on the receiver.
•You can also press SHIFT repeatedly to select a memory page (A, B or C) and then press the numeric buttons to select a preset number.
5 Press MEMORY again.
The station is stored to the selected preset number.
If “MEMORY” goes out before you press MEMORY, start again from step 3.
Tuning to preset stations
1 Press TUNER repeatedly to select the FM or AM band.
The last received station is tuned in.
2 Press PRESET/CH/D.SKIP + or PRESET/CH/D.SKIP – repeatedly to select the preset station you want.
Each time you press the button, you can select the preset station as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
Using the receiver
1Press INPUT SELECTOR repeatedly to select FM or AM.
2Press PRESET TUNING – or PRESET TUNING + repeatedly to select the preset station you want.
To select the preset station directly
Press the numeric buttons.
The preset station of the selected number in the current memory page is tuned in. Press SHIFT repeatedly on the remote to change the memory page.
20GB