If you are unable to remedy the problem using the troubleshooting guide
Clearing the receiver’s memory may remedy the problem (page 14). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing the receiver’s memory
To clear | See |
All memorized settings | |
|
|
Customized sound fields | |
|
|
Specifications
Amplifier section
Power Output
Models of area code CEL, CEK (6 ohms 1 kHz, THD 0.7%)1)
FRONT2): 40 W/ch
CENTER2): 40 W
SURR2): 40 W/ch
(6 ohms 1 kHz, THD 10%)1)
FRONT2): 60 W/ch
CENTER2): 60 W
SURR2): 60 W/ch
Models of area code AU
(6 ohms 120
FRONT2): 35 W/ch
CENTER2): 35 W
SURR2): 35 W/ch
(6 ohms 1 kHz, THD 0.7%)1)
FRONT2): 40 W/ch
CENTER2): 40 W
SURR2): 40 W/ch
(6 ohms 1 kHz, THD 10%)1)
FRONT2): 60 W/ch
CENTER2): 60 W
SURR2): 60 W/ch
Models of area code CN
(6 ohms 1 kHz, THD 0.7%)1)
FRONT2): 40 W/ch
CENTER2): 40 W
SURR2): 40 W/ch
(6 ohms 1 kHz, THD 10%)1)
FRONT2): 60 W/ch
CENTER2): 60 W
SURR2): 60 W/ch
(6 ohms 1 kHz, THD 0.7%)3)
FRONT2): 37 W/ch
CENTER2): 37 W
SURR2): 37 W/ch
(6 ohms 1 kHz, THD 10%)3)
FRONT2): 55 W/ch
CENTER2): 55 W
SURR2): 55 W/ch
1) Measured under the following conditions:
Area code | Power requirements |
CEL, CEK, CN | 230 V AC, 50 Hz |
|
|
AU | 240 V AC, 50 Hz |
|
|
2)Depending on the sound field settings and the source, there may be no sound output.
38GB