Press SET UP.

Multi channel surround setup (continued)

Specifying the speaker parameters

1

2 Press the cursor buttons (U or u) to

select the parameter you want to adjust.

3 Press + or – to select the setting you want.

The setting is stored automatically.

4 Repeat steps 2 to 3 until you have set all of the parameters that follow.

Initial settings

Parameter

Initial setting

L

R

(FRONT) XX.X m

DIST. 5.0 m

 

 

 

C

(CENTER) XX.X m

DIST. 5.0 m

 

 

 

 

SL

SR

(SURR) XX.X m

DIST. 3.5 m

 

 

 

 

SL

SR

(SURR) PL. XXX

PL. BEHD.

 

 

 

 

SL

SR

(SURR) HGT. XXX

HGT. LOW

 

 

 

 

xFront speaker distance ( L R )

Set the distance from your listening position to the front speakers (A on page 13).

xCenter speaker distance ( C )

Set the distance from your listening position to the center speaker. Center speaker distance should be set from a distance equal to the front speaker distance (A on page 13) to a distance

1.5meters closer to your listening position (B on page 13).

xSurround speaker distance (SLSR)

Set the distance from your listening position to the surround speakers. Surround speaker

distance should be set from a distance equal to the front speaker distance (A on page 13) to a

distance 4.5 meters closer to your listening position (C on page 13).

Tip

The receiver allows you to input the speaker position in terms of distance. However, it is not possible to set the center speaker further than the front speakers.

Also, the center speaker cannot be set more than 1.5 meters closer than the front speakers.

Likewise, the surround speakers can not be set farther away from the listening position than the front speakers. And they can be no more than 4.5 meters closer.

This is because incorrect speaker placement is not conducive to the enjoyment of surround sound. Please note that, setting the speaker distance closer than the actual location of the speakers will cause a delay in the output of the sound from that speaker. In other words, the speaker will sound like it is farther away.

For example, setting the center speaker distance 1~2 m closer than the actual speaker position will create a fairly realistic sensation of being “inside” the screen. If you cannot obtain a satisfactory surround effect because the surround speakers are too close, setting the surround speaker distance closer (shorter) than the actual distance will create a larger sound stage.

Adjusting these parameter while listening to the sound often results in much better surround sound. Give it a try!

14GB