Understanding the multi channel surround displays
| q; qa | 1 | 2 | 3 | 4 |
| |
| SLEEP | aDIGITAL PRO LOGIC | DTS | STEREO/MONO | MEMORY | ||
SW SP. OFF | OPT COAX |
| D.RANGE |
|
| ||
L | C | R |
|
|
|
|
|
L F E |
| 7 6 |
| 5 |
|
| |
SL | S | SR |
|
|
|
98
Surround Enjoying
1; DIGITAL: Lights up when the receiver is decoding signals recorded in the Dolby Digital format.
2PRO LOGIC: Lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. However, this indicator does not light if the center and surround speakers are set to “NO”, and “A.F.D.” or “NORMAL SURROUND” is selected.
3DTS: Lights up when DTS signals are input.
4Tuner indicators: Light up when using the receiver to tune in radio stations, etc. See pages
5D.RANGE: Lights up when dynamic range compression is activated. See page 23 to adjust the dynamic range compression.
6COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal.
7OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal.
8Playback channel indicators: The letters light up to indicate the channels being played back.
L (Front Left), R (Front Right), C (Center (monaural)), SL (Surround Left), SR (Surround Right), S (Surround (monaural or the surround components obtained by Pro Logic processing)), SW (Sub woofer)
The boxes around the letters light up to indicate the speakers used to playback the channels.
9L F E : Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and when the sound of the LFE channel signal is actually being reproduced.
0SLEEP: Lights up when sleep timer is activated.
qa SP.OFF: Lights up when headphones are inserted.
Sound