Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony HT-SS2000 Listening to FM/AM radio, Resetting sound fields to the initial settings, Tuner Operations, Automatic tuning, Tip, 49GB, U, UC, 9 kHz, Tuner, 10 kHz, 100 kHz

1 68

Download 68 pages, 1.23 Mb

Resetting sound fields to the initial settings

Be sure to use the buttons on the receiver for this operation.

1,22

PRESET TUNING

SOUND FIELD

MASTER VOLUME

MUTING

AUTO CAL MIC

1 Press ?/1 to turn off the receiver.

2 While holding down SOUND FIELD +, press ?/1.

“S.F. CLR.” appears on the display and all sound fields are reset to their initial setting.

Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (page 23).

Tip

The tuning scale for direct tuning differs depending on the area code as shown in the following table. For details on area codes, see page 3.

	Area code		FM		AM
	U, UC		100 kHz		10 kHz*
	CEL, CEK		50 kHz		9 kHz	Tuner
	*The AM tuning scale can be changed (page 66).					Tuner
	*The AM tuning scale can be changed (page 66).					Operations
	Automatic tuning					Operations
	Automatic tuning
			SYSTEM STANDBY
	VIDEO 1	VIDEO 2	VIDEO 3	DVD
	SAT	TV	SA-CD/CD TUNER		1
	2CH	A.F.D.	MOVIE	MUSIC	1
	2CH	A.F.D.	MOVIE	MUSIC
	1	2	3	AMP MENU
	1	2	3
	4	5	6	AUTO CAL
	4	5	6
	7	8	9	D.TUNING
	7	8	9	D.SKIP
				D.SKIP
	>10/		MEMORY	DVD MENU	FM MODE
	-	0/10	ENTER		FM MODE
	CLEAR			FM MODE
	DISPLAY		TOOLS	MUTING

F

TV VOL

MASTER VOL

G g

f
RETURN/EXIT	MENU
TV CH –		TV CH +
PRESET – REPLAY ADVANCE PRESET +
. <	<	>	2
TUNING –		TUNING +	2
m	H	M
TV

Xx

continued

49GB

Contents

Page WARNING For customers in the United States –Reorient or relocate the receiving antenna –Increase the separation between the equipment and receiver –Consult the dealer or an experienced radio/TV technician for help About This Manual The HT-SF2000consists of: • Receiver • Speaker systema) – Front speakers Note for the supplied remote (RM-AAU017) The VIDEO 3 button on the remote is not available for receiver operation Table of Contents Description and location of parts Front panel About the indicators on the display MDTS NSW Rear panel RM-AAU017 D MOVIE Press to select sound fields (MOVIE) MUSIC (MUSIC) O RETURN EXIT O – exit the menu while the satellite tuner or Blu-ray disc player is displayed on 1: Installing speakers HT-SF2000only Example of HT-SS2000front speaker HT-SS2000only Example of installing the speakers on the wall 15GB 2: Connecting speakers ASpeaker cord (supplied) Note on speaker cords Note on speakers 3:Connecting the audio/ video components Component to be connected AAudio cord (not supplied) If you connect a DVD recorder AOptical digital cord (not supplied) BAudio cord (not supplied) CCoaxial digital cord (supplied) •Do not bend or tie optical digital cords 20GB HDMI feature AHDMI cable (not supplied) If you connect a Blu-raydisc player Notes on HDMI connections 4: Connecting the antennas 5:Preparing the receiver and the remote 6:Calibrating the appropriate settings automatically Before you perform Auto Calibration Example: HT-SS2000 2 Set up the optimizer microphone 26GB To cancel Auto Calibration When error codes appear To rectify the error When you select “WARN CHK” When you select “PHASE” After you have finished 7:Adjusting the speaker levels and balance To turn off the test tone Selecting a component To mute the sound To avoid damaging your speakers Listening/Watching a component Set up the DVD player Refer to “Quick Setup Guide” supplied with the receiver You can also use INPUT SELECTOR on this receiver to select “DVD” Switch the input of the TV so that an image of the DVD is displayed Watching a DVD Navigating through menus To return to the previous display To exit the menu Overview of the menus Menu Parameters Settings 35GB 36GB Initial setting 37GB Operations Amplifier Adjusting the level LEVEL menu parameters Adjusting the tone TONE menu parameters Settings for the surround sound SUR menu parameters Settings for the tuner Settings for the audio TUNER menu parameters AUDIO menu parameters Settings for the video VIDEO menu parameters Settings for the system SYSTEM menu parameters The distance between the center speaker and the listening position xSUR POS. (Surround speaker position) •BEHD/HI •BEHD/LO •SIDE/HI Enjoying Dolby Digital and DTS Surround sound Types of A.F.D. mode Selecting a preprogrammed sound field 46GB Types of sound field available About DCS (Digital Cinema Sound) About CINEMA STUDIO EX modes To turn off the surround effect for movie/music Using only the front speakers and sub woofer Listening to FM/AM radio If you cannot tune in a station In case of poor FM stereo reception Presetting radio stations Using the controls on the receiver Displaying RDS information While receiving an RDS station, press DISPLAY repeatedly Description of program types Program type Description Switching between digital and analog audio Audio input modes Enjoying the DIGITAL MEDIA PORT AVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Listening to digital sound from other inputs Assignable inputs for digital audio input Using the Sleep Timer Changing button assignments Categories and the corresponding buttons To clear all remote button assignments Glossary Precautions On safety On power sources On heat buildup On placement Troubleshooting Audio There is no sound from one of the front speakers •Check the setting of HDMI AUDIO in the VIDEO menu (page 41) •Check the HDMI connection •You cannot listen to the Super Audio CD by connecting HDMI The left and right sounds are unbalanced or reversed Video Tuner Remote control Error messages If you are unable to remedy the problem using the troubleshooting guide Specifications AUDIO POWER SPECIFICATIONS Power requirements FM tuner section AM tuner section General Power consumption • Sub woofer (SS-WP2200) HT-SS2000only •Front speakers (SS-MSP1200) •Center speaker (SS-CNP1200) •Surround speakers (SS-SRP1200) Index