•Make sure you have connected to both the L and R jacks of an analog component, and not only to either the L or R jack. Use an audio cord (not supplied).
The source sound input to the HDMI jack on the receiver is not output from the TV speaker.
•Check the setting of HDMI AUDIO in the VIDEO menu (page 41).•Check the HDMI connection.•You cannot listen to the Super Audio CD by connecting HDMI.•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.
The left and right sounds are unbalanced or reversed.•Check that the speakers and components are connected correctly and securely.•Adjust the balance parameters using the LEVEL menu (page 38).There is severe hum or noise.•Check that the speakers and components are connected securely.
•Check that the connecting cords are away from a transformer or motor, and at least 3 m (10 ft) away from a TV set or fluorescent light.
•Move your audio components away from the TV.•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
There is pop noise from a specific component connected to this receiver when you turn on the component.
•Check that the IN MODE is not set to “AUTO IN” for the selected input (page 54).
There is no sound, or only a very low- level sound is heard from the center/ surround speakers.
•Select a CINEMA STUDIO EX mode (page 47).•Adjust the speaker level (page 30).•Check that the speakers are connected securely.There is no sound from the sub woofer.•Check that the sub woofer is connected correctly and securely.The surround effect cannot be obtained.•Make sure you have selected a sound field with MOVIE or MUSIC button.•Sound fields do not function for signals with a sampling frequency of more than 48 kHz.
Dolby Digital or DTS multi channel sound is not reproduced.•Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.
•When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component.
Information Additionalcontinued
63GB