Tips

•Since the subwoofer does not emit highly directional signals, you can place it wherever you want.

•(Except for HTD-710SF) For greater flexibility in the positioning of the speakers, use the optional WS-FV11 or WS-FV10D floor stand (available only in certain countries).

Attaching foot pads

(Except for HTD-710SF)

To prevent speaker vibration or movement, attach the supplied foot pads to the speaker as shown in the illustration below.

Note

Be sure to attach the supplied foot pads to the subwoofer as well.

Installing the speakers on the wall

You can install your front and surround speakers on the wall.

1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below.

more than 4 mm

more than 25 mm

4.6 mm

10 mm

Hole on the back of the speaker

2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm.

Started Getting

5 to 7 mm

3 Hang the speakers on the screws.

Hole on the back of the speaker

4.6mm

10 mm

Notes

•Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied.

•Contact a screw shop or installer regarding the wall material or screws to be used.

•Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.

continued

13GB