Enjoying Surround Sound

Using only the front speakers and subwoofer

— 2CH STEREO

In this mode, the receiver outputs the sound from the front left/right speakers and subwoofer only.

When multi channel surround formats are input, the signals are downmixed to 2 channel with bass frequencies being output from the subwoofer.

When standard 2 channel stereo sources are input, the receiver’s bass redirection circuitry will be activated. The front channel bass frequencies will be output from the subwoofer.

Press 2CH to select “2CH ST.”.

The receiver switches to the 2CH STEREO mode.

Enjoying higher fidelity sound

Decoding the input audio

 

 

signal automatically (AUTO

 

FORMAT DIRECT)

Enjoying

In this mode, the receiver automatically detects

 

the type of audio signal being input (Dolby

 

Digital, DTS, standard 2 channel stereo, etc.)

Surround

and performs the proper decoding if necessary.

 

This mode presents the sound as it was recorded/

 

encoded, without adding any surround effects.

 

However, if there are no low frequency signals

Sound

(Dolby Digital LFE, etc.) it will generate a low

 

frequency signal for output to the subwoofer.

 

Press A.F.D. repeatedly to select “A.F.D.

AUTO”.

The receiver automatically detects the type of audio signal being input and performs the proper decoding if necessary.

continued

23GB