xEFCT. XXX (Effect level)
Initial setting: STD
Lets you adjust the “presence” of the surround effect in 3 levels – MIN (minimum effect), STD (standard effect) and MAX (maximum effect).
Note
This parameter is valid only when you use a sound field selected with the MOVIE or MUSIC buttons.
Resetting sound fields to the initial settings
Use the buttons on the receiver for the operation.
1 Press ?/1 to turn off the power.
2 While holding down SOUND FIELD, press ?/1.
“SF. CLR.” appears in the display and all sound fields are reset to the initial setting.
Adjusting the tone
You can adjust the tonal quality (bass, treble level) of the front speakers using the TONE menu.
1 Start playing a source encoded with multi channel surround effects (DVD, etc.).
2 | Press MAIN MENU repeatedly to select | |
3 | “ TONE | ”. |
Press | or repeatedly to select the |
parameter you want to adjust.
For details, see “TONE menu parameters” below.
4 While monitoring the sound, press or repeatedly to select the setting you want.
The setting is entered automatically.
5 Repeat steps 3 and 4 to adjust the other items.
Notes
•You cannot adjust the tone when the receiver is decoding signals with a sampling frequency of more than 48 kHz.
•You also cannot adjust the tone when you select a sound field for movies and music (page 24, 25).
TONE menu parameters
xBASS XX dB
(Front speaker bass level)
xTREB. XX dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from
Settings and Adjustments Advanced
27GB