Controller Setting:

1Press the MODE button repeatedly to display [WL].

2Press the Fn button.

3Press the g or G button to make [CTRL] blink.

4Press the Fn button.

5Press the g or G button to make RATIO [ON] blink.

6Press the Fn button.

7Press the f or F button to select the lighting ratio.

•The lighting ratio may be set to the following. 1, 2, 4, 8, 16, --*

*The flash unit cannot flash when the lighting ratio is set to [--].

8Press the g or G button to select the lighting ratio of the controller and off-camera flash units (RMT, RMT2).

9Press the Fn button.

10Press the TTL/M button to display .

•When is selected, manual setting flash is used with the lighting ratio control.

Applications

67