9
10
Press the Fn button.
Set the shutter speed and aperture.
•The shutter speed is calculated as follows to suit the selected flash frequency and number of flashes.
Number of flashes (TIME) ÷ Flash frequency (Hz) = Shutter speed
For example, when ten flashes and 5 Hz are selected, 10 ÷ 5 = 2 requires a shutter speed of longer than two seconds.
11When the flash is fully charged, press the shutter button to take the photo.
•The distance at which the proper exposure is obtained with a single flash is displayed on the LCD panel.
•To prevent shaking, the use of a tripod is recommended during multiple flash photography.
•Test flash will flash at the selected frequency/number/level while the TEST button is being pressed if [TEST1] is selected in the custom setting. When [TEST3] or [TESTM] is selected, the flash three times or the four second modeling flash has priority.
•The use of custom settings allows the camera to be set up for multiple flash photography without selecting the M mode (page 74).
52