Set the wireless flash while the flash unit is attached to the camera, and then remove it from the camera. For details, refer to the operating instructions supplied with the external flash. When the
2Attach the controller to the camera, and turn on the power of the camera, controller, and
3Set up the camera with the controller and the off- camera flash.
•See page 55 for details.
4Make sure that the controller and the flash unit are fully charged.
•When the flash unit is fully charged in the wireless flash mode, the AF illuminator on the front blinks, and the TEST button is lit in amber.
5Use
•The
•If the
6Check again that the controller and the flash unit are fully charged, and press the shutter button to take the photo.
68