Menus Through Setting and Adjusting 5 Chapter

Operating the Menus

 

Icon/Menu

Submenu

 

Setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISPLAY

MARKER

 

Selects whether to output MARKER BURN or not.

 

 

 

SET

BURN

 

 

OFF

 

:

 

 

Does not output MARKER BURN.

 

 

 

(page 42)

 

 

ON :

 

 

 

Outputs MARKER BURN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

There are some limitations to output MARKER BURN. For details, see page 42.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ALLSCAN

 

Reduces the image on LCD panel to check the area surrounding the picture frame where

 

 

 

MODE

 

the monitors can not display.

 

 

 

 

 

 

OFF

 

:

 

Disables the ALLSCAN MODE.

 

 

 

 

 

 

ON :

 

 

 

Enables the ALLSCAN MODE.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes

 

 

 

 

 

 

• ALLSCAN MODE is for HDV format only. ALLSCAN MODE does not activate when

 

 

 

 

 

 

DVCAM and DV(SP)-formatted tapes are played.

 

 

 

 

 

• If formats are mixed on a tape, the part where the format has changed on a tape cause

 

 

 

 

 

 

distortion of images.

 

 

 

 

 

• When [ON] is selected and the output level of COMPONENT OUT is set to 480i, 576i,

 

 

 

 

 

 

480p/480i, or 576p/576i, output images from S VIDEO OUT jack and VIDEO OUT jack

 

 

 

 

 

 

down converts to letter box. For details, see page 85.

 

 

 

 

 

• Once the unit turns off, the setting of [ALLSCAN MODE] sets to [OFF] automatically.

 

 

 

 

 

• When you set [MARKER BURN] and [ALLSCAN MODE] in [DISPLAY SET] menu to [ON]

 

 

 

 

 

 

at the same time, the marker will not appear in the correct position on LCD monitor. This is

 

 

 

 

 

 

not a malfunction. The marker will be output correctly via each video jack.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DATA CODE

 

Selects whether or not to display the data codes on the analog video output.

 

 

 

(page 36)

 

 

OFF

 

:

 

Does not display the data codes.

 

 

 

 

 

 

DATE:

Displays the date and time when recorded.

 

 

 

 

 

 

CAMERA DATA: Displays the camera data.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LETTER SIZE

 

Selects the letter size of the menu at the cursor.

 

 

 

 

 

 

NORMAL

:

Normal size

 

 

 

 

 

 

2 x :

 

Double height size

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DATE

 

Selects the date display in the search screen, the data code display, etc.

 

 

 

DISPLAY

 

 

Y/M/D :

Displays YY/MM/DD (year/month/day).

 

 

 

 

 

 

M/D/Y:

Displays MM/DD/YY (month/day/year).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Default setting for HVR-M25U/M25N.)

 

 

 

 

 

 

D/M/Y:

Displays DD/MM/YY (day/month/year).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Default setting for HVR-M25E/M25P.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIME

 

Selects the time display in the search screen, the data code display, etc.

 

 

 

DISPLAY

 

 

12H :

Displays 12-hour time. (Default setting for 60i as the factory setting.)

 

 

 

 

 

 

24H :

Displays 24-hour time. (Default setting for 50i as the factory setting.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMAINING

 

 

 

 

 

 

 

The remaining tape time is displayed for 8 seconds under the following

 

 

 

 

 

AUTO

:

 

 

 

 

(page 26)

 

 

 

 

 

 

 

 

 

 

 

conditions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

– If the remaining tape time is determined when you turn on power while

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a cassette is loaded in the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

– When you press PLAY button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Always displays under the following conditions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

– Fast forward, rewind

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

– Fast forward during playback, rewind during playback

 

 

 

 

 

 

ON :

Always displays the remaining tape time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LCD BRIGHT

 

Adjusts LCD monitor brightness. Press J/j buttons and EXEC button to adjust the

 

 

 

 

 

brightness. (The mark under the bar is the factory setting value.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LCD COLOR

 

Adjusts the color density of LCD monitor. Press J/j buttons and EXEC button to adjust the

 

 

 

 

 

brightness. (The mark under the bar is the factory setting value.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

72 Chapter 5 Adjusting and Setting Through Menus