Location and Function of Parts
Front Panel
1q (cassette) indicator
2KEY INH (key inhibit) switch
3Remote sensor
4ON/STANDBY switch
and lamp
5 TIMER switch
6 AUDIO OUTPUT SELECT switch
7 PHONE LEVEL control knob
8 PHONES jack
9INPUT SELECT switch
q; INDEX/(A1) button
qd Cassette compartment
4Indicator section (see page 17)
qs EJECT (cassette eject) button
3Audio control section (see page 16)
2Tape transport control section (see page 14)
1Monitor display section (see page 12)
qa DISPLAY OUTPUT switch
Overview 1 Chapter
1 q (cassette) indicator
Lights when a digital video cassette is loaded. Does not light up while the unit is not loading a cassette.
This indicator blinks while a cassette is being ejected.
For details, see “Inserting/Ejecting Cassettes” on page 31.
2KEY INH (key inhibit) switch
Turning on this switch disables all buttons to prevent accidental button operations.
Notes
•Even when this switch is set to ON, the switches 5, 6, 9, and
•Even when you set this switch to ON, you can operate the unit with Remote Commander, LANC
jack, CONTROL S jack, and HDV/DV jack.
3Remote sensor
Note
In addition to Remote Commander supplied with the unit, the unit accepts signals from any Sony Remote Commander whose command mode is set to VTR4. To disable the control from Remote Commander, set [COMMANDER] in [OTHERS] menu to [CONTROL S].
4ON/STANDBY switch and lamp
Press this switch to turn the unit on, and ON/ STANDBY lamp lights up green. When you press this switch again, the unit goes into STANDBY mode and the lamp lights up red.
Note
When KEY INH switch 2 is set to ON, ON/ STANDBY switch does not work. Set KEY INH switch to OFF to enable ON/STANDBY switch.
(Continued)
Chapter 1 Overview | 9 |