9
Getting Started
Step 2: Attaching the supplied microphone and the lens hood with lens cover
When you use the supplied microphone
(ECM-XM1) for recording sound, do the
following steps.
1Attach the wind screen B to the
supplied microphone A.
2Place the microphone A in the
microphone holder C with the
model name facing upward, close
the cover, and shut the clamp.
3Connect the plug of the
microphone to the INPUT1 jack
D.
4Put the microphone cable into the
cable holder E.
5Select channels with the CH1 (INT
MIC/INPUT1) switch F and the
CH2 (INT MIC/INPUT1/INPUT2)
switch G.
See the table below for the recording
channels.

Attaching the supplied

microphone

Put the cable in the outer cable holder.
Continued ,