74
xTRANS CURVE
You can select the transition curve.
Characteristics of the transition curves are
illustrated in the following graphs.
*1: parameter level
*2: time
LINEAR
Makes the transition linearly.
BSOFT STOP
Makes the transition slowly at the end.
SOFT TRANS
Makes the transition slowly at the
beginning and end, and linearly in
between.
bNotes
You cannot change [TRANS TIME] and
[TRANS CURVE] settings during store, check,
or execution of [SHOT TRANSITION]. Cancel
[SHOT TRANSITION] setting by pressing the
ASSIGN 4 button several times before changing
[TRANS TIME] or [TRANS CURVE] setting.
xSTART TIMER
You can set the timer for starting the shot
transition. You can select the time from
[5sec], [10sec] and [20sec]. The default
setting is [OFF].
xREC LINK
BOFF
Not use this function
SHOT-A
Starts transition to SHOT-A when
recording is started.
SHOT-B
Starts transition to SHOT-B when
recording is started.
When you set this function to [ON], you
can record with the wider color range. Your
camcorder can reproduce brilliant and vivid
colors for flowers and the beautiful blue-
green of tropical oceans that cannot be
matched by conventional technologies.
The default setting is [OFF].
bNotes
The colors may not be well reproduced when
you play back a movie recorded with this
function set to [ON] on a TV that does not
support x.v.Color.
You cannot set [x.v.Color] in the following
cases:
When recording in SD (standard) format
When recording movies
When you set [x.v.Color] to [ON], the picture
profile will be disabled.
xON/OFF
When you select [ON], you can display
color bars on the screen or record them on a
tape. This function helps you to adjust
colors when you view movies recorded
with your camcorder on a TV or a monitor.
The default setting is [OFF].
bNotes
This function is automatically set to [OFF]
when you turn the power off and back on.
*1
*2
*1
*2
*1
*2
x.v.Color COLOR BAR
Press the MENU button t select the (CAMERA SET) with the SEL/PUSH EXEC dial.