Sony HVR-Z7U EXEC dial, adjustment again, the SEL/PUSH EXEC dial, button to end this menu, 3Press (one push) button C, will take about 15 seconds

the dial to set the temperature. You can also set the color temperature from the menu ([WB TEMP SET] p. 69).

To save the adjusted white balance value in memory A or B1Set the white balance memory switch toA ( A) or B ( B) in step 3 of “Adjusting to natural color (White balance).”

2Capture a white subject, such as white paper, full-screen in the same lighting condition as the one in which the subject is.

3Press (one push) button C.

A or B starts flashing rapidly. It will stay on when the white balance adjustment is completed and the

adjusted value is stored in A or B.To adjust the white balance automaticallyPress the WHT BAL button B or set the AUTO/MANUAL switch E to AUTO.

bNotes

•When you set the AUTO/MANUAL switch E to AUTO, other manual adjustments (iris, gain, and shutter speed) also become automatic.

Adjusting the black balanceNormally, you do not need to adjust the black balance.The black balance may become off in some recording conditions.

If that happens, adjust the black balance. The adjusted settings are stored only temporarily. The settings return to the default settings when you turn the power off and back on.

1 Press the MENU button during standby.

2 Select [BLK BALANCE] in the (CAMERA SET) menu with

the SEL/PUSH EXEC dial.
3 Select [YES] with the SEL/PUSH
EXEC dial.
The black balance adjustment starts. It
will take about 15 seconds.
4 When [Completed.] appears on
	Recording/Playback
the screen, press the MENU
button to end this menu.
If the black balance adjustment fails
Check that the iris is closed, then try the
adjustment again.

bNotes

•When using a non-Carl Zeiss lens, close the iris prior to the adjustment.

Customizing the picture quality (Picture profile)

SEL / PUSH EXEC	PICTURE STATUS
	MENU PROFILE CHECK

AB

Continued , 33