Press DIVIDE during recording.
“DIVIDING …” appears on the display and the new message number is added at the point you pressed the button. The message will be recorded as two messages, however recording continues without stopping.
Message 1 | Message 2 | Message 3 |
Message is divided.
Message 2 and Message 3 are recorded without stopping.
Tip
You can divide the currently recorded message during recording pause.
Notes
You need a certain amount of free space in the memory to divide a message. For more information, see “System Limitations” on page 100.
If 99 messages have been recorded in a folder, you cannot divide a message in that folder.
Once a message is divided, you cannot re- combine the divided messages.
You cannot divide a message at the very beginning (0.5 seconds from the beginning) or at the very end (0.5 seconds prior to the end) of the message.
When you divide a message into two, at the point of division, the end of the first message and the beginning of the second message may be interrupted.
During synchronized recording (page 31) and FM recording (page 85), you cannot divide a message.
If you divide messages too frequently while the unit is recording them, the following phenomenon may occur: The operation indicator keeps flashing, and you cannot operate the unit for a certain period. This is not a malfunction. Wait until the operation indicator goes off.
28GB