3 Set the alarm date and time.

Press or on the control button to select “DATE,” a day of the week, or “DAILY,” and then press ENT.

When you select “DATE”:

Set the year, month, day, hour, and minute in sequence, as described in “Step 2: Setting the Clock” on page 15, then press ENT.

When you select a day of the week or “DAILY”:

Press or on the control button to set the hour and then press ENT, press or on the control button to set the minute and then press ENT.

The setting process is finished and “” (alarm indicator) appears in the display window.

When the set date and time comes

At the set time, the alarm will sound for about 10 seconds while “ALARM” is displayed in the display window and the selected message will be played back. When the playback ends, the IC recorder will stop automatically at the beginning of that message.

To listen to the same message again

Press , and the same message will be played back from the beginning.

To stop the alarm before the playback starts

Press (stop) while the alarm sound is heard. You can stop the alarm playback even when the HOLD function is activated.

To change the alarm setting

Start from step 2 on page 46.

Messages Recording/Playback

47GB