Sony ICF-SW7600GR 20GB, — Auto scan tuning, 2 Press FM/AM to select either band, 4 Hold down –?K or when the unit starts, 1 Press POWER ON/OFF to turn on the radio

Searching the station automatically

— Auto scan tuning

1

2

6

3 3, 4, 5

1 Press POWER ON/OFF to turn on the radio.

2 Press FM/AM to select either band.

To listen to SW, MW or LW broadcasts, select AM.

3 For AM bands, hold down AM BAND and press –?Kor k?+ to select MW (medium wave), LW (long wave) or meter band (short wave).

The lowest frequency of the band (meter band) will appear in the display each time the button is pressed.

For FM, skip this step.

4 Hold down –?Kor when the unit starts

k?+ for about 2 seconds. Release scanning.

Stations will be searched automatically. The unit will stop at each reception and will resume scanning after about 3 seconds (auto scan tuning).

The unit will scan within the frequency range of the chosen band or meter band (see “Frequency range of bands/meter bands”, page 19).

5 When the unit tunes in to the desired broadcast, press the outer –?Kor k?+.

Auto scan will stop at that broadcast station.

6 Press the inner K – or + k to adjust to the optimum frequency.

20GB Listening to the radio