Getting Started
Connect the Aerial
The RF (Aerial) Input impedance of this television is 75Ω. If your aerial lead is 300Ω ribbon (two wires separated by a flat plastic sheet) you will require a 300Ω/75Ω Balun (not supplied) in order to connect your aerial to the television.
300Ω Cable
75Ω
Cable
300Ω / 75Ω | RF |
Balun | Input |
Note:
For your safety any external aerial should be installed by a reputable qualified installer and should comply with Australian Standard AS1417.1.
Connect the Power Plug
This television is designed for the Australian Standard Mains Voltage of 240V 50Hz.
NOTE:
If the television is not going to be used for an extended period, remove the power plug from the wall outlet.
Turn on the Television
Push the Power Switch to turn the television ON.
Sit back and enjoy your new Panasonic television.
3
