Remote Control Television Operation
BUTTON | WHAT IT DOES |
STANDBY
The remote control button is used to turn the television into
PICTURE
This button is used to select the picture menu. Please refer to page 13 for detailed operating instructions.
SOUND
This button is used to select the sound menu. Please refer to page 15 for detailed operating instructions.
SET UP
This button is used to select the set up menu. Please refer to page 17 for detailed operating instructions.
STEREO / MONO
Pushing the button changes the mode from Stereo ( 
) to Mono ( 
) and back again. Normally the television will detect whether the broadcast signal is Mono or Stereo and will set the mode accordingly. If the Stereo signal is weak or if the receiving conditions are not the best, it is recommended that the Mono mode be manually selected.
BILINGUAL *
This system allows two languages to be transmitted on one signal. Switching between the Main ( I ) and Sub ( II ) positions selects the desired language.
*Note: Bilingual sound is not currently available in Australia.
100Hz / PROGRE
This button allows you to change the Picture refresh setting between AUTO, 100Hz MODE and PROGRESSIVE. Please refer to SCAN MODE on page 13.
SURROUND
This button switches the SURROUND Sound on and off.
ASPECT
This button is used to move through the different aspect options of AUTO, 4:3, 16:9 and
Note: AUTO is only available in AV Mode.
RECALL
Pushing this button will display all current active functions. The functions that can be displayed include AV Number, Programme Number, Sound Option, Picture Option, Stereo or Mono and
If the button is not Pushed within about 2 seconds it automatically switches to display the Programme Number or the AV Number and the
Pushing the button again cancels the recall function and removes the text being displayed on the screen.
Please refer to drawing on Page 7 for location of Remote Control Buttons.
9
