Panasonic TX-68P200A manual Connecting Equipment to the TV Rear Panel Connections, Monitor Out

Connecting Equipment to the TV

Rear Panel Connections

When using a VCR with the television always connect the Aerial to the VCR and connect an RF Cable (not supplied) between the VCR RF-Out and the television RF-In.

You can watch videos by either tuning the television to the

VCR (see page 27) or by connecting the VCR to the rearRF Cable AV terminals.

Note: When connecting a mono VCR through the RF-In, please switch the TV to mono.

MONITOR

OUT

S-VIDEO

VIDEO

L

AUDIO

R

AV1	AV2
IN	IN
	DVD
	Y-P -P
	Y
MONO	MONO
	PB
	PR

AV4

IN

DVD

Y-P -P

VIDEO

Y

MONO

PB

L

AUDIO PR

R

Monitor Out

The Monitor Out terminals reproduce the signals currently on the television screen. The on-screen signals could be a television programme or signals connected to one of the AV inputs.

The Monitor Out facility can be used to allow one video source (videotape, video disc etc.) to be connected to more than one television. Connect the Monitor out from this television to the AV Input of the second television.

If a video recorder is connected to the Monitor Out and video sources (VCR, video disc, camera etc.) are connected to one or more of the AV inputs, the television becomes a visual display for tape editing or copying. Unauthorised recording of material from Television Broadcasts or from other video

and/or audio sources may contravene copyright laws.

The Monitor Out Audio can also be connected to a stereo amplifier or other hi-fi equipment.

VIDEO

L

AUDIO

R

MONITOR

OUT

VIDEO

L

AUDIO

R

NOTE:

Never connect the same video recorder or other device to both the VIDEO IN and MONITOR OUT terminals of this television as this could cause incorrect operation.

34