Parts of Function and Location 2 Chapter

2-1 Control Panel

Tape transport indicator area

•Tape transport indicator

When you press each button in the tape transport control section, the corresponding indicators light. m: REW (rewind) indicator

B: PLAY indicator

When AUTO TRACKING (the automatic tape loading function) is in operation, this indicator flashes.

M: F FWD (fast forward) indicator

x: STOP indicator

•JOG/SHTL (jog/shuttle) indicator

The “JOG” indicator lights when playback is carried out in jog mode, and the “SHTL” indicator lights when playback is carried out in shuttle mode.

•JOG/SHTL (jog/shuttle) transport indicator b: Jog/shuttle reverse indicator (green)

B: Jog/shuttle forward indicator (green)

x: Jog/shuttle still indicator (red)

2-1-2 Search Control Section

1JOG/SHUTTLE button

2 JOG dial

3SHUTTLE dial

1JOG/SHUTTLE button

Use this button to toggle between jog mode and shuttle mode when using the JOG dial or SHUTTLE dial. Press this button once for playback in jog mode, or press this button twice for playback in shuttle mode during playback or F FWD/REW. The corresponding “JOG” indicator or “SHTL” indicator lights in the display section.

2JOG dial

Turn this to carry out playback in the modes shown in the table in the right column. Turn the dial clockwise for forward playback and counterclockwise for reverse playback.

3SHUTTLE dial

Turn this to carry out playback in the modes shown in the following table. Turn the dial clockwise for forward playback and counterclockwise for reverse playback.

After pressing the JOG/SHUTTLE button, turn the JOG dial for playback in jog mode and the SHUTTLE dial for playback in shuttle mode.

Playback modes using the JOG/SHUTTLE dial

Playback mode

Operations and functions

 

 

Jog

Press the JOG/SHUTTLE button once to

 

light “JOG,” then turn the JOG dial, or

 

simply turn the JOG dial without lighting

 

“JOG.” Playback is carried out at a

 

speed corresponding to the rotating

 

speed of the JOG dial. The playback

 

speed range is from –1 to +1 times

 

normal speed.

 

The JOG dial has no detents.

 

 

Shuttle

Press the JOG/SHUTTLE button twice to

 

light “SHTL,” then turn the SHUTTLE

 

dial, or simply turn the SHUTTLE dial

 

without lighting “SHTL.” Playback is

 

carried out at a speed corresponding to

 

the angular position of the SHUTTLE

 

dial. The playback speed range is as

 

follows.

 

When using a Digital Betacam tape

 

(J-30/30SDI):–21 to +21 times normal

 

speed

 

When using an MPEG IMX tape (J-30/

 

30SDI): –32/–38 to +32/+38 times

 

normal speed (NTSC/PAL)

 

When using a Betacam SX tape: –35

 

to +35 times normal speed

 

When using an analog Betacam tape:

 

–18/–20 to +18/+20 times normal

 

speed (NTSC/PAL)

 

The SHUTTLE dial has detents at the

 

center position, and at that point a still

 

picture is displayed.

 

 

Notes

•Normally, you turn the SHUTTLE dial after setting the jog/shuttle mode by pressing the JOG/SHUTTLE button. However, you can also set the jog/shuttle mode simply by turning the dial. (This feature is available when SELECTION FOR JOG/SHUTTLE DIAL ENABLE, extended menu item 101 of the setup menu, is set to DIAL.) In this case, you must reset the SHUTTLE dial to the center position after turning it, otherwise the dial may be moved by vibration and the tape may start running in the shuttle mode during playback.

2-6

Chapter 2 Location and Function of Parts