Menu Setup 7 Chapter
Item number | Item name | Settings | ||||||||
|
|
|
|
|
|
| ||||
719 | SYSTEM PHASE SYNC | Adjust the SYNC phase of the output signal. | ||||||||
|
| Default value: | 3FH |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
721 | Y/C DELAY | Adjust the Y/C delay for playback from an analog Betacam cassette. | ||||||||
|
| Default value: | 800H |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
802 | DIGITAL AUDIO MUTE IN | Set the digital audio muting conditions during shuttle playback. | ||||||||
| SHUTTLE MODE | OFF | : Not muted. | |||||||
|
| CUEUP: Muted during | ||||||||
|
| FULL: Muted in shuttle mode. | ||||||||
|
| SLOW: Muted in ±0.2 times or slower. | ||||||||
808 | INTERNAL AUDIO | Select the operation of the internal audio test signal generator. | ||||||||
| SIGNAL GENERATOR | OFF |
| : No operation. | ||||||
|
| 1KHZ: At 1 kHz, | ||||||||
|
|
|
|
|
|
|
|
|
|
|
831a) | i.LINK AUDIO OUTPUT | Selects audio channels output from the DV connector. | ||||||||
| SELECT | CH1/2 | : Outputs audio signals (16 bits/48K) recorded in | |||||||
|
| CH3/4: Outputs audio signals (16 bits/48K) recorded in | ||||||||
|
| CH1/2/3/4: Outputs audio signals (12 bits/32K) recorded in | ||||||||
|
| CH5/6: Outputs audio signals (16 bits/48K) in | ||||||||
|
| CH7/8: Outputs audio signals (16 bits/48K) in | ||||||||
|
| CH5/6/7/8: Outputs audio signals (12 bits/32K) in | ||||||||
901b) | VIDEO OUTPUT DATA | Set the bit length of the signal output from the SDI output connector. | ||||||||
|
| : When connecting to a | ||||||||
| 10bit | |||||||||
|
| 8bit: When connecting to a | ||||||||
922 | IMX NOISELESS PB | Select the noiseless playback picture output when using the MPEG IMX format. | ||||||||
| SELECT | FRAME | : Frame picture | |||||||
| FIELD1: | Field 1 picture | ||||||||
|
| FIELD2: Field 2 picture |
a)Audio signals are muted if you select the channel unavailable for the format you are using.
b)Select the bit length used in the system to which this unit is connected.