5-2 UMID Output and Display

UMID 5 Chapter

This section explains how to output and display UMIDs.

5-2-1 UMID Output Settings

You can choose to output UMIDs or not from the SDI or SDI (SUPER) output connector, and select either Basic UMID or Extended UMID when you choose to output UMIDs. Make these settings using extended menu item 651, UMID OUTPUT.

See page 7-11 for more information about extended menu item 651.

5-2-2 UMID Display

During playback, UMID data appears on the video monitor by superimposition.

1Instance Number Generation Method

2 Instance Number

3 Material Number Generation Method

4, 5 Material Number

6 Year/Month/Date

7 Hour:Minute:Second

8 Time Zone

9 GPS Altitude

0 Number of Satellites qa Auxiliary Device

(“ ”: not equiped, “+”: equiped)

qs PDOP (Position Dilution Of Precision value) qd Longitude (E: east/W: west)

qf Latitude (S: south/N: north) qg Organization Code

qh User Code qj Country Code

Functions

To display the UMID

Press the PLAY button while holding down the SHIFT button.

To exit from UMID display

Press again the PLAY button while holding sown the SHIFT button.

UMID display on the video monitor

During playback in the Digital Betacam format (J-30SDI) or in the MPEG IMX format (J-30/30SDI), the video monitor connected to the COMPOSITE (SUPER) output connector, SDI (SUPER) output connector (for J-30SDI only) or DV connector displays all UMID items at once as shown in the following figure.

5-2Chapter 5 UMID Functions