4 Holding down the JOG/SHUTTLE button, turn the JOG/SHUTTLE dial to change the setting from 525 to 625.
The displays change as follows.
Time data display area
Monitor screen
525/625 SYSTEM SELECT
625
Push SET button!!
To cancel the 525/625 setting operation Holding down the SHIFT button, press the SET/ MENU button the required number of times to exit from the menu.
5 Press the SET/MENU button.
The displays change as follows.
Time data display area |
|
| You can see |
| “POWER OFF/ON” |
| by scrolling the |
Monitor screen | indication. |
|
525/625 SYSTEM SELECT
625
POWER off/on!!
This switches from the 525 (NTSC) to the 625 (PAL) system; the 525 indicator goes off, and the 625 indicator lights.
The menu settings disappear from the time data display area, and returns to the normal indications.
Menu bank operations (basic menu items B01 to B12)
This unit allows two different complete sets of menu settings to be saved in what are termed “menu banks,” numbered 1 and 2. Saved sets of menu settings are recalled for use as required.
To jump to menu item B01 or H01
The unit recalls any required menu items when you turn the JOG/SHUTTLE dial after pressing the SET/ MENU button while holding down the SHIFT button. Press the SET/MENU button while holding down the SHIFT button, then press the CTL/TC/UB button. Every time you press the CTL/TC/UB button, menu item H01 or B01 is recalled alternately.
Saving the current active menu settings
Set menu item SAVE BANK 1, basic menu item B11, or SAVE BANK 2, basic menu item B12, to ON, depending on which of the menu banks you wish to use to save the setting, then press the SET/MENU button.
Recalling settings from a menu bank
Set menu item RECALL BANK 1, basic menu item B01, or RECALL BANK 2, basic menu item B02, to ON, depending on which of the menu banks you wish to recall settings from, then press the SET/MENU button.
|
|
| Recall |
| ||
Current active |
|
|
|
|
| Menu bank 1 |
| Save | |||||
menu settings |
|
| ||||
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recall
Menu Setup 7 Chapter
6 Turn the POWER switch off momentarily, then turn it on again.
Save
Menu bank 2
Chapter 7 Setup Menu