Using the Clock/Timers 
Menu
To access the Clock/Timers Menu, use the following steps:
|
|
| Clock/Timers |
To Display | To Highlight | To Select | Timer 1:Set |
|
|
| Timer 2:Set |
|
|
| Current Time |
Press v to highlight an option, then press . | Move | Select |
| End |
| |
|
|
|
|
| ||
|
|
|
|
| ||
| Timer 1 | Clock/Timers functions apply to analog channels only. You cannot set the Clock/ | |||||
Timer 2 | Timers for digital channels. |
|
|
|
|
|
Scheduled | Use the timers to program your TV to turn on and off by day, time, |
|
| |||
viewing | duration, and channel. The timer duration is a maximum of six hours. | |||||
| When the channel is fixed, it is not necessary to set the channel. |
|
| |||
1Use the V or v buttons to highlight Timer 1 or Timer 2, then press 
.
2Use the V or v buttons to enter the desired day, start time, duration,
and channel, then press 
. The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be on.
3Press 
to exit the menu.
✍Select Off to turn off the Timer. Your previous settings will be saved.
Current Time Set your TV to the current day and time. Press 
to open the Current Time menu:
1Use the V or v buttons to enter the correct day and time, then press 
.
2Press 
to exit the menu.
✍You must set the Current Time before you can use Timer 1 or Timer 2.
✍When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
Menus Analog
27