Other Information
Audio
Problem | Possible Remedies |
Good picture, no sound | ❏ Press MUTING so that Muting disappears from the screen (see page 52). |
| ❏ Make sure the Speaker option is set to On in the Audio Menu (see page 93). |
|
|
Audio noise | ❏ Communication problems may occur if the infrared communication equipment |
| (e.g., infrared cordless headphones) is used near the LCD projection TV. Please |
| use headphones other than infrared cordless headphones. Also, if you use the |
| infrared communication equipment other than infrared cordless headphones, |
| move the infrared transceiver away from the LCD projection TV until the noise is |
| eliminated, or move the transmitter and receiver of the infrared communication |
| equipment closer together. |
|
|
Cannot gain enough volume | ❏ Increase the volume of the cable box using the cable box’s remote control. Then |
when using a cable box | press FUNCTION repeatedly until the LCD projection TV indicator lights up and |
| adjust the LCD projection TV’s volume. |
|
|
Sound seems weak or | ❏ The LCD projection TV’s audio might be set to Auto SAP or Mono, when it |
insufficient | might be better set to Stereo. In the Audio Menu (see page 93), set the MTS |
| setting to Stereo. If already set to Stereo, switch to Mono (which may reduce |
| background noise during weak stereo broadcasts). |
Cannot raise the volume on external speakers
❏If the Speaker option is set to Off and the Audio Out option is set to Fixed (in order to output the sound to your audio system) use your audio receiver to adjust the sound (see page 93). Or, to use the LCD projection TV remote control, set the
Audio Out option to Variable.
❏To turn on the LCD projection TV speakers, set the Speaker option to On (see page 93).
Channels
Problem | Possible Remedies | |
Cannot receive upper channels | ❏ | Press ANT to select the VHF/UHF input (see page 47). |
(UHF) when using an antenna | ❏ | Use Auto Program in the Channel Menu to add receivable channels that are not |
|
| presently in the LCD projection TV’s memory (see page 96). |
|
|
|
TV is fixed to one channel | ❏ | Use Auto Program in the Channel Menu to add receivable channels that are not |
|
| presently in the LCD projection TV’s memory (see page 96). |
| ❏ | Check your Channel Fix settings (see page 96). |
|
|
|
Cannot receive any channels | ❏ | Use Auto Program in the Channel Menu to add receivable channels that are not |
when using cable TV |
| presently in the LCD projection TV’s memory (see page 96). |
| ❏ | Press ANT to select the CABLE input (see page 47). |
|
|
|
Cannot receive or select | ❏ | Use Auto Program in the Channel Menu to add receivable TV channels that are |
channels |
| not presently in LCD projection TV memory (see page 96). |
|
|
|
Some digital cable channels are | ❏ | Certain cable companies have limitations on the broadcast of digital cable |
not being displayed |
| channels. Check with your cable company for more information. |
| ❏ | The digital cable channel may be set to Hide in the Digital Setup Menu (see page |
|
| 62). |
|
|
|
112