Using the Features

Watching the TV

Buttons for LCD Projection TV Operations

RM-Y1000

Many TV features can be accessed directly through the remote control. The following will explain the function of some of the buttons found on your remote control.

1FUNCTION

Press until the TV indicator lights up.

This activates the remote control for use with the LCD projection TV.

2ANT

Press to change between the VHF/UHF input and the CABLE input.

3POWER

Press to turn the LCD projection TV on and off. If a video input indication (e.g., VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO or CH +/ – until a channel number appears.

40-9, and ENTER

Use for direct channel selection. Press 0-9to select an analog channel (for example, to select channel 10, press 1 and 0). The channel will change after 3 seconds, or you can press ENTER for immediate selection.

For digital subchannels, press 0-9, , press 0-9again, and then

ENTER.

zYou can also select digital channels using the digital program guide. See page 60 for details.

5CH +/–

Press to scan through the channels (+ up or – down).

6VOL +/–

Press to adjust the volume (+ up or – down).

7JUMP

Press to jump back and forth between the current channel and the last channel selected.

8MUTING

Press to mute the sound. “MUTING” will appear on the screen and will dim three seconds later. To restore the sound, press again or press VOL +.

9FREEZE

This is useful when you need to copy down information that appears on the LCD projection TV’s screen (see “Using the Freeze Function” on page 58).

52