Installing and Connecting the LCD Projection TV
Cable Box and Cable Only
For best results, use this connection if:
❑Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels.
❑You do not have a VCR. (If you have a VCR, see pages 32 and 33.)
With this connection you can:
❑Use the LCD projection TV remote control to change channels coming through the cable box to the LCD projection TV’s VHF/UHF input jack. (You must first program the remote control for your specific cable box; see “Programming the Remote Control” on page 48.)
❑Use the LCD projection TV remote control to change channels coming directly into the LCD projection TV’s CABLE input. (The LCD projection TV’s tuner provides a better signal than the cable box.)
Splitter
Coaxial cable
CATV cable
|
| IN OUT |
Coaxial | Cable box | |
cable |
| |
|
| |
| Coaxial cable | |
CABLE
VHF/UHF
Rear of LCD projection TV
About Using This Connection with Dual Picture (Twin View, etc.) Features
With this connection, you can use all the dual picture features for unscrambled channels coming directly into the LCD projection TV’s CABLE input jack.
Notes on Using This Connection
To Do This ... | Do This ... |
Use the cable box | Tune the LCD projection TV to the channel the |
| cable box is set to (usually channel 3 or 4) and |
| then use the cable box to switch channels. |
|
|
Set up the LCD projection TV | Program the remote control. See “Programming |
remote control to operate the | |
cable box |
|
|
|
Activate the remote control to | Press FUNCTION repeatedly until the SAT/ |
operate the cable box | CABLE indicator lights up. |
|
|
28