Using the Features
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Function | Equipment | Programmable Code |
|
| Number |
DVD/VCR | Sony DVD player | 751 |
|
|
|
SAT/CABLE | Sony DSS tuner | 801 |
|
|
|
i.LINK | Sony DVD player (i.LINK) | 901 |
|
|
|
If you have video equipment other than Sony brand that you want to control with the LCD projection TV’s remote control, use the following procedure to program the remote control.
✍The equipment must have infrared (IR) remote capability in order to be used with the remote control.
1Turn to the list of “Manufacturer’s Codes” on page 49, and find the
2Press FUNCTION repeatedly until the DVD/VCR, SAT/CABLE or i.LINK indicator lights up.
3Press SAT/CABLE for five seconds until the indicator of the selected input flashes.
4While the desired indicator is flashing, enter the
5Press ENTER.
✍You must do step 5 within 10 seconds of step 4, or you must redo steps 4 through 5.
6To check if the code number works, aim the LCD projection TV’s remote control at the equipment and press POWER that corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer.
Notes
❑If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment.
❑If you enter a new code number, the code number you previously entered at that setting is erased.
❑In some cases, you may not be able to operate your equipment with the supplied remote control. In such cases, use the equipment’s own remote control unit.
❑Whenever you remove the batteries to replace them, the code numbers may revert to the factory setting and must be reset.
48