Installing and Connecting the LCD Projection TV

Notes on Using This Connection

To Do This ...

Do This ...

Switch the TV’s input between

Press ANT to switch back and forth between the

the cable and antenna

TV’s VHF/UHF and CABLE inputs.

 

 

✍It is highly recommended to connect the antenna using a 75-ohm coaxial cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it away as far as possible from the LCD projection TV.

✍Do not use an indoor antenna because it is especially susceptible to radio noise.

TV Projection LCD the Connecting and Installing

27