Sony 4-127-735-12(1), KDL-19S55xx Viewing pictures from connected equipment, 20 GB, screen, screen, Description, Description, Symbol on the, Symbol on the, For a USB device

Viewing pictures from connected equipment

Turn on the connected equipment, then perform one of the following operation.

For an auto-tuned VCR (page 8)

In analogue mode, press PROG +/-, or the number buttons, to select the video channel.

For other connected equipment

Press to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if two seconds pass without any operation after pressing F/ f.)

For a USB device

See page 21.

Symbol on the	Description
screen
Component	To see the equipment connected to
	A.

For KDL-32S55xx/KDL-26S55xx

	HDMI1,	HDMI IN 1, HDMI IN 2 or HDMI
	HDMI1,	HDMI IN 1, HDMI IN 2 or HDMI
	HDMI2 or	IN 3
	HDMI2 or	IN 3
	HDMI3	To see the equipment connected to
	HDMI3	To see the equipment connected to
		B, C or J.
		Digital video and audio signals are
		input from the connected
		equipment.
		If the equipment has a DVI socket,
		connect the DVI socket to the
		HDMI IN 2 socket through a DVI-
		HDMI adaptor interface (not
		supplied), and connect the
		equipment’s audio out sockets to
		the audio in sockets in the HDMI
		IN 2 sockets.
		Connect to the HDMI IN 3 socket,
		to view photographs or screen
		images from a PC or digital video
		camera.

Symbol on the	Description
screen
For KDL-22S55xx/KDL-19S55xx
HDMI1 or	HDMI IN 1 or HDMI IN 2
HDMI2	To see the equipment connected to

Mor N.

Digital video and audio signals are input from the connected equipment.

If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 1 socket through a DVI- HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets to the audio in sockets in the HDMI IN 1 sockets.

Connect to the HDMI IN 2 socket, to view photographs or screen images from a PC or digital video camera.

AV1/	AV1/ To see the equipment connected to
AV1	D.
AV2/	AV2/ To see the equipment connected to
AV2	E.
PC	To see the equipment connected to
	G.
	z

•It is recommended to use a PC cable with ferrites like the “Connector, D-sub 15” (ref. 1- 793-504-11, available in Sony Service Centre), or equivalent.

USB	To see the equipment connected to
	I.
	To view photographs or listen to
	the music on USB storage media
	connected to the TV.
AV3	To see the equipment connected to
	K.
	When connecting mono
	equipment, connect to the
	AV3 L socket.

•Be sure to use only an authorised HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable.

•When HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 22 to set up this communication.