8: Auto-tuning the TV

1 Before you start auto-tuning the TV, insert a pre-recorded tape into the VCR connected to the TV (page 5) and start play back.

The video channel will be located and stored on the TV during auto-tuning.

If no VCR is connected to the TV, skip this step.

2 Press .

Auto Tuning

Do you want to start Auto Tuning?

Back: Start:

The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding.

If a message appears for you to confirm the aerial connection

No digital or analogue channels were found. Check all the aerial connections and press to start auto-tuning again.

3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 27).

If you do not change the order in which the analogue channels are stored on the TV, go to next step.

4 When the Eco Preset menu appears on the screen, if you press “Yes,” the “Eco” settings are changed to recommended values to reduce power consumption.

Eco Preset

Do you want to use the Eco Preset?

Choosing "YES" will reduce power consumption.

 

Power Saving

Reduce

 

Idle TV Standby

3 h

PC Power Management

On

 

 

 

 

 

Yes

 

No

 

 

 

 

 

 

 

 

 

 

 

5 Press MENU to exit.

The TV has now tuned in all the available channels.

Detaching the Table- Top Stand from the TV

~

•Do not remove the Table-Top Stand for any reason other than to wall-mount the TV.

KDL-32S55xx/KDL-26S55xx

Table-Top

Stand

KDL-22S55xx/KDL-19S55xx

Table-Top

Stand

8 GB