Features
To create your own track numbers
You can create your own track numbers at any point.
Whilst recording, additional track numbers can be created at any point by pressing the REC button.
●One track number will be added.
●If you press the BASS button on the remote control, you can create your own track number.
To prevent recorded MiniDiscs from being erased accidentally
Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indi- cated by the arrow.
●The MiniDisc will then be protected against accidental erasure.
Useful
Recording tracks as a single track
You can record several pieces of music as a single track by disabling the auto marker function.
When a recording is paused or whilst recording…
Press the EDIT button.
Note:
●When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automati- cally regardless of the setting of the auto marker func- tion.
Recordable R e c o r d i n g prevented
●To add a recording to such a MiniDisc, slide the accidental erase prevention tab back to its origi- nal position.
Helpful tip when attaching a label
When attaching a label to an MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and it may not be pos- sible to remove it.
●If the label peels off or partially lifts
away, replace it with a new one.
● Do not put a new label on top of an existing one.
●Attach the label only in the specified location.
1918
19 | 02.09.2000, 02:37 PM |
