Advanced Features
Operation of the MiniDisc for stamping
6 Load a MiniDisc for stamping.
7 Press the ENTER/SYNC button.
●The unit will finish recording the character infor- mation and enter the stop mode.
Notes:
●If the total number of tracks on the master MiniDisc does not match that on the MiniDisc for stamping, the unit will display "Can't STAMP" and turn off the power.
If this happens, adjust the total number of tracks on the newly recorded MiniDisc using the edit operation.
●Use a MiniDisc that was recorded by this unit to make a MiniDisc for stamping. Character information may not be transferred if you use a MiniDisc recorded by other equipment. In such a case, enter at least one charac- ter for the disc name or the track names. You can trans- fer information once you record the TOC.
3534
35 | 02.07.2000, 10:04 AM |
