Sharp MD-SR60E operation manual 4342, References, No Signal

ERROR MESSAGES

NO SIGNAL

MEANING

●Poor connection of the digital cable.

●No output signal comes out from the connected unit to playback.

REMEDY

●Connect the digital cable securely.

●If the portable CD player has a function to prevent sound skips, deactivate it.

●Playback with the connected unit.

References

PLAY MD	● You recorded on a playback-only	● Replace it with a recordable disc.
	disc.
POWER ?	● Improper power is being supplied.	● Use one of the specified power sources.
	● The write protection tab of a MiniDisc	● Move the write protection tab back to its original position.
PROTECTED	is set to the protected position.	● Replace it with a recordable MiniDisc.
	● You tried to record on a playback-
	only disc.
SORRY	● Since a track number is currently	● Wait for a while and try the operation again.
	being located or written to, the unit
	cannot accept your command.
TEMP OVER	● The temperature is too high.	● Turn off the power, and wait for a while.
TOC FORM (**)	● There is an error in the recording	● Erase all of the tracks, and then record again.
	signal.
	● There is no space left for recording	● Replace it with another recordable disc.
TOC FULL	character information (track names,
	disc names, etc.).
Tr. Protect	● The track has been protected from	● Edit the track with the device on which it was recorded.
	being erased.
	● A disc which contains data other than	● A disc which contains non-music data cannot be
? DISC	music was played.	played.
	● There is an error in the signal re-	● Replace it with another recorded disc.
	corded on the disc.

Number or symbol appears in (*) position.

4342

**06-REFERENCES 43 02.07.2000, 10:04 AM