Basic operation
1 Insert the headphones into the head- phones remote control unit.
2 Plug the remote control into the socket on the unit.
3 Insert a MiniDisc (page 8).
4 Press the 06 button.
●Playback starts automatically with a playback only MiniDisc or a MiniDisc which is protected against accidental erasure
To interrupt playback
Press the 06 button.
●To resume playback, press the 06 button again.
To stop playback
Press the • ■/:OFF button.
●If the unit is not operated for at least 2 minutes whilst in the stop mode, the power will shut off automatically.
To turn off the power
Press the • ■/:OFF button whilst in the stop mode.
Volume control
Press the VOL+ button to increase the volume and the VOL– button to decrease the volume.
Volume (0 - 30)
Bass control
Each time the BASS button is pressed, the tone will be switched as follows.
BASS1 | Emphasised slightly |
BASS2 | Emphasised more |
BASS3 | Emphasised fully |
BASS OFF | Cancelled |
Notes:
●If power failure occurs whilst playing a disc using the AC adaptor, disconnect it from the wall socket. Otherwise, play- back may start automatically when electricity resumes.
●If you connect the AC adaptor without installing the re- chargeable battery, playback may start automatically. Be sure to turn off the power.
●Reduce the volume before starting to play. MiniDiscs, compared to ordinary cassette tapes, have very little noise. If the volume is adjusted according to your usual expectations of noise, high volume may damage your hearing.
●The sound escaping from your headphones may annoy people around you.
In particularly crowded places (such as on trains or buses), reduce the volume.
1514
15 | 02.07.2000, 10:03 AM |