Sharp MD-SR60E Preparation, Inserting a MiniDisc, 2 1 4 3, Lift it up the compartment

Models: MD-SR60E

1 48
Download 48 pages 6.86 Kb
Page 9
Image 9
Inserting a MiniDisc

Inserting a MiniDisc

Preparation

2

1

4

Preparation 3

Check that the erase-protection tab is in the recordable position.

1 Slide the OPEN lever to release the com- partment door.

2 Lift it up the compartment.

3 Insert a MiniDisc by pressing the middle of the edge of the disc.

4 Close the compartment door.

Notes:

Do not place the MiniDisc under the holder.

If any resistance is felt, do not force the MiniDisc into the unit, as it may cause damage to the unit. If resistance is felt, remove the MiniDisc and reload it.

To prevent recordings being lost the MiniDisc can not be removed until the TOC has been written (“TOC” or “TOC EDIT ! ” is displayed ). Press the • /:OFF button to update the TOC and power off, the MiniDisc can now be removed. Refer to the instructions on page 12.

89

**02-PREPARATION

9

02.07.2000, 10:05 AM

Page 9
Image 9
Sharp MD-SR60E Preparation, Inserting a MiniDisc, 2 1 4 3, Lift it up the compartment, Close the compartment door