Settings
Picture
Picture Mode
Selects the picture mode except for PC input source. The options for “Picture Mode” may differ depending on the “Video/Photo” setting (page 24). “Vivid”: (“Shop”, see page 7). For enhanced picture contrast and sharpness. “Standard”: (“Home”, see page 7). For standard picture. Recommended for home entertainment.
“Cinema”: For viewing
“Photo”: Sets the optimum picture quality for photographs.
Display Mode (only in
PC mode/ PC Input/ HDMI PC Input)Selects the display mode for PC input source. “Video”: For video images.
“Text”: For text, charts or tables.
Reset | Resets all picture settings except “Picture Mode” and “Display Mode” (only in |
| PC mode) to the factory settings. |
|
|
Backlight | Adjusts the brightness of the backlight. |
|
|
Contrast | Increases or decreases picture contrast. |
|
|
Brightness | Brightens or darkens the picture. |
|
|
Colour | Increases or decreases colour intensity. |
|
|
Hue | Increases or decreases the green and red tones. |
| z |
| “Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes). |
|
|
Colour Temperature | Adjusts the whiteness of the picture. |
| “Cool”: Gives the white colours a blue tint. |
| “Neutral”: Gives the white colours a neutral tint. |
| “Warm 1/Warm 2”: Gives white colours a red tint. “Warm 2” gives a redder |
| tint than “Warm 1” |
| z |
| “Warm 1 and Warm 2” are not available when “Picture Mode” is set to “Vivid”. |
|
|
Sharpness | Sharpens or softens the picture. |
|
|
Noise Reduction | Reduces the picture noise (snowy picture) in a weak broadcast signal. |
| “Auto”: Automatically reduces the picture noise (in analogue mode only). |
| “High/Medium/Low”: Modifies the effect of the noise reduction. |
| “Off”: Turns off the “Noise Reduction” feature. |
| z |
| “Auto” is not available for AV1, AV2, AV3, HDMI 1, HDMI 2, HDMI 3, |
| Component, PC and digital mode. |
|
|