x.v.Colour (except for
KDL-32W4xxx, KDL-32E4xxx, KDL-26E4xxx, KDL-37V4xxx, KDL-32V4xxx, KDL-26V4xxx)
Displays moving pictures that is more faithful to the original source by matching the colour space of source.
~
•The setting is fixed to “Normal” when the input signal is HDMI (RGB), even if “x.v.Colour” is selected.
•Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 720p, 1080i or 1080p.
Photo Colour Space (except for
KDL-32W4xxx,
KDL-32E4xxx,
KDL-26E4xxx,
Selects the option (sRGB, sYCC, Adobe RGB) to match the output colour space within the output signal from the equipment connected to the HDMI, component input jacks or USB.
~
•Select “sYCC” when using the equipment that supports “x.v.Colour”.
•Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i or 1080p.
•Not available when “Colour Space” is set to “Wide” (page 23).
Timer Settings | Sets the timer to turn on/off the TV. | |
| Sleep Timer | |
| Sets a period of time after which the TV automatically switches itself into | |
| standby mode. | |
| When the Sleep Timer is activated, the (Timer) indicator on the TV (front) | |
| lights up in orange. | |
| z | |
| • | If you switch off the TV and switch it on again, “Sleep Timer” is reset to |
|
| “Off”. |
| • | “Sleep timer will end soon. Power will be turned off” appears on the screen |
|
| one minute before the TV switches to standby mode. |
| On Timer Settings | |
| “On Timer”: Sets the timer to turn on the TV from standby mode. | |
| “Timer Mode”: Selects the desired period. | |
| “Time”: Sets the time to turn on the TV. | |
| “Duration”: Selects the time period after which the TV automatically switches | |
| to standby mode again. | |
| Clock Set | |
| Allows you to adjust the clock manually. When the TV is receiving digital | |
| channels, the clock cannot be adjusted manually since it is set to the time code of | |
| the broadcasted signal. | |
|
|
|
|
|
|
|
|
|
|
| |
|
| |
Auto | Starts the “first time operation menu” to select the language, country/region and | |
| location, and tune in all available digital and analogue channels. Usually, you do | |
| not need to do this operation because the language and country/region will have | |
| been selected and channels already tuned when the TV was first installed | |
| (page 6). However, this option allows you to repeat the process (e.g., to retune | |
| the TV after moving house, or to search for new channels that have been | |
| launched by broadcasters). | |
|
| |
Language | Selects the language in which the menus are displayed. | |
|
|
|
Continued
Functions MENU Using