Dual Sound | Selects the sound from the speaker for a stereo or bilingual broadcast. |
| “Stereo/ Mono”: For a stereo broadcast. |
| “A/ B/ Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” |
| for sound channel 2, or “Mono” for a mono channel, if available. |
| z |
| If you select other equipment connected to the TV, set “Dual Sound” to |
| “Stereo”, “A” or “B”. |
~
“Sound Effect”, “Treble”, “Bass”, “Balance” and “Auto Volume” are not available when “Speaker” is set to “Audio System”.
Features
Quick Start | The TV turns on faster than usual within two hours after switching to standby | |
| mode. However, power consumption in standby mode is higher than usual. | |
|
| |
Power Saving | Selects the power saving mode to reduce the power consumption of the TV. | |
| When “Picture Off” is selected, the picture is switched off and the | (Picture |
Off) indicator on the TV front panel lights up in green. The sound remains unchanged.
“Standard Power”: Default settings.“Reduced Power”: Reduces the power consumption of the TV.
“Picture Off”: Switches off the picture. You can listen to the sound with the picture off.
Light Sensor
“On”: Automatically optimises the picture settings according to the ambient light in the room.
“Off”: Turns off the “Light Sensor” feature.
~
| Be sure not to put anything over the sensor, as its function may be affected. See |
| page 12 for the location of the light sensor. |
|
|
Logo Illumination | Lights up and turns off the Sony logo on the front of the TV. |
(except for |
|
|
|
|
|
|
|
|
|
Film Mode | Provides an improved picture quality which is optimized for film when playing |
| DVD images taken on film and non progressive (interlaced). |
| “Auto”: Detects the picture contents (video or film) and optimizes the picture |
| quality. Use this setting for standard use. |
| “Off”: Turns off the “Film Mode” feature. |
| ~ |
| • If the image contains irregular signals or too much noise, “Film Mode” will be |
| automatically turned off even if “Auto” is selected. |
| • “Film Mode” is not available when “Video/ Photo” is set to “Photo” or when |
| photograph is detected if |
|
|
Video/Photo | Provides suitable image quality by selecting the option depending on the input |
| source (video or photograph data). |
| |
| data or photograph data when directly connecting Sony HDMI |
| equipment that supports |
| “Video”: Produces suitable image quality for moving pictures. |
| “Photo”: Produces suitable image quality for still images. |
| ~ |
| • The setting is fixed to “Video” when |
| connected equipment, even if |
| • Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i |
| or 1080p. |
|
|