“AV2 Output”: Sets a signal to be output through the socket labelled | / | ||||
/ | AV2 on the rear of the TV. If you connect a VCR/ DVD recorder or | ||||
other recording equipment to the | / | / | AV2 socket, you can then | ||
record from the equipment connected to other sockets of the TV. |
| ||||
•“TV”: Outputs a broadcast.
•“Auto”: Outputs whatever is being viewed on the screen (except signals
from the HDMI IN 1, HDMI IN 2, HDMI IN 3, 
/
COMPONENT
IN and 
/
PC IN sockets).
“Speaker”: Turns on/off the TV’s internal speakers.
• “TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound through the TV speakers.
• “Audio System”: The TV speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. When connected with “Control for HDMI” compatible equipment, you can turn the connected equipment on interlocked with the TV. This setting must be made after connecting the equipment.
“Audio Out”:• “Variable”: The audio output from your audio system can be controlled by the TV’s remote.
• “Fixed”: The audio output of the TV is fixed. Use your audio receiver’s
| volume control to adjust the volume (and other audio settings) through your |
| audio system. |
| z |
| “Audio Out” is not available for audio system connected to the TV using the HDMI |
| sockets. |
|
|
| HDMI | This is used to set the “Control for HDMI” compatible equipment connected to |
| the HDMI sockets. Note that the interlock setting must also be made on the |
| connected “Control for HDMI” compatible equipment side. |
| “Control for HDMI”: This sets whether to interlock the “Control for HDMI” |
| compatible equipment and the TV. When set to “On”, the following menu items |
| can be performed. However, power consumption in standby mode is higher than |
| usual. |
| “Auto Devices Off”: When this is set to “On”, the “Control for HDMI” |
| compatible equipment turn on and off interlocked with the TV. |
| “Auto TV On”: When this is set to “On” and if the connected HDMI, control |
| compatible equipment is turned on, the TV automatically turns on, and the |
| displays the HDMI input from the connected equipment. |
| “Device List Update”: Creates or updates the “HDMI Device List”. Up to 14 |
| “Control for HDMI” compatible equipment can be connected, and up to 4 |
| equipment can be connected to a single socket. Be sure to update the “HDMI |
| Device List” when you change the “Control for HDMI” compatible equipment |
| connections or settings. Select them manually one by one until getting a correct |
| picture for several seconds. |
| “HDMI Device List”: Displays the connected “Control for HDMI” compatible |
| equipments. |
|
|
| Product Information | Displays your TV’s product information. |
|
|
| All Reset | Resets all settings to the factory settings and then displays the “Auto |
| screen. |
z
•Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any buttons.
•All settings, including Digital Favourite list, country/region, language, auto tuned channels, etc. will be reset.
Functions MENU Using