Viewing pictures from connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For an auto-tuned VCR (page 6)

In analogue mode, press PROG +/-, or the number buttons, to select the video channel.

For other connected equipment

Press / repeatedly until the desired input source (see below) appears on the screen.

Symbol on the

Description
screen

 

 

AV1/

AV1

To see the equipment connected to J.

AV2/

AV2

To see the equipment connected to K.

 

 

~

 

 

SmartLink is a direct link between the

 

 

TV and a VCR/DVD recorder.

AV3

 

To see the equipment connected to I.

AV4

 

HDMI IN 4*.

 

 

To see the equipment connected to F.

AV5

 

HDMI IN 5*.

 

 

To see the equipment connected to E.

 

 

If the equipment has a DVI socket,

 

 

connect the DVI socket to the HDMI IN

 

 

socket through a DVI-HDMI adaptor

 

 

interface (not supplied), and connect the

 

 

equipment’s audio out sockets to the

 

 

audio in HDMI IN sockets.

AV7

 

HDMI IN 7*.

 

 

To see the equipment connected to C.

*~

•Be sure to use only an HDMI cable that bears the HDMI logo.

•When HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 18 to set up this communication.

•When connecting an audio system with HDMI socket, be sure to also connect to the HiFi socket.

Symbol on the

Description

screen

 

 

 

AV6 or

To see the equipment connected to B.

AV6

z

To avoid picture noise, do not connect

the camcorder to the video socket 6

and the S video socket 6 at the same time. If you connect mono equipment, connect to the L socket

6.

PC

To see the equipment connected to G.

 

z

 

It is recommended to use a PC cable

 

with ferrites.

To connect

Do this

 

 

 

 

 

 

 

 

Headphones A Connect to the i socket to listen to

Using

 

sound from the TV on headphones.

 

 

 

 

 

 

 

 

 

Conditional

To use Pay Per View services.

Optional

Access Module

For details, refer to the instruction

 

(CAM) D

manual supplied with your CAM. To

 

 

use the CAM, remove the rubber cover

 

 

from the CAM slot. Switch off the TV

Equipment

 

when inserting your CAM into the

 

 

 

CAM slot. When you do not use the

 

 

CAM, we recommend that you replace

 

 

the cover on the CAM slot.

 

 

~

 

 

 

 

 

 

CAM is not supported in all countries.

 

 

Please check with your authorized dealer.

 

 

 

 

 

 

 

 

Hi-Fi audio

Connect to the audio output sockets

 

equipment H

 

 

 

to listen to the sound from the TV

 

 

 

 

 

 

on Hi-Fi audio equipment.

 

 

 

 

 

 

 

Additional operations

 

 

 

 

 

 

 

 

To

 

 

 

Do this

 

 

 

 

 

 

 

Return to normal TV

Press DIGITAL or ANALOG.

 

mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Access the Input

 

 

 

Press to access the Input

 

signal index table

 

 

 

signal index table. To select an

 

(except analog mode)

input source, press F/f, then

 

 

 

 

 

press .

 

 

 

 

 

 

 

Change the volume of

Press 2 +/-.

 

the connected HDMI

 

 

 

 

control compatible

 

 

 

 

audio system

 

 

 

 

 

 

 

 

 

 

 

 

 

Mute the sound of the

Press %.

 

connected HDMI

 

 

 

Press again to restore.

 

control compatible

 

 

 

 

audio system

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Continued

17 GB