HDMI Set-up

This is used to set the HDMI control compatible equipment connected to the HDMI

 

sockets. Note that the interlock setting must also be made on the connected HDMI

 

control compatible equipment side.

 

“HDMI Control”: This sets whether to interlock the HDMI control compatible

 

equipment and the TV. When set to “On”, the following menu items can be

 

performed.

 

“Auto Devices Off”: When this is set to “On”, the HDMI control compatible

 

equipment turn on and off interlocked with the TV.

 

“Auto TV On”: When this is set to “On”, the TV turns on interlocked with the

 

HDMI control compatible equipment.

 

“Device List Update”: Creates or updates the “HDMI Device List”. Up to 11 HDMI

 

control compatible equipment can be connected, and up to 5 equipment can be

 

connected to a single socket. Be sure to update the “HDMI Device List” when you

 

change the HDMI control compatible equipment connections or settings.

 

“HDMI Device List”: Displays the connected HDMI control compatible

 

equipments.

 

 

Sound Offset

Sets an independent volume level to each equipment connected to the TV.

Manual Programme Preset

Before selecting “Label”/“AFT”/“Audio Filter”/“LNA”/“Skip”/“Decoder”, press F/f to select the programme number you want to modify. Then, press .

System

Presets programme channels manually.

1Press F/f to select “System”, then press .

2Press F/f to select one of the following TV broadcast systems, then press G.

B/G: For western European countries/regions

D/K: For eastern European countries/regions

L: For France

I: For the United Kingdom

~

Depending on the country/region selected for “Country” (page 5), this option may not be available.

Channel

1Press F/f to select “Channel”, then press .

2Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.

3Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number.

Functions MENU Using

4Press to jump to “Confirm”, then press .

5Press f to select “OK”, then press .

Repeat the procedure above to preset other channels manually.

Label

Assigns a name of your choice, up to five letters or numbers, to the selected channel.

AFT

Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality.

27 GB